Tag Archives: motor hydraulic

China OEM Hydraulic Motor Planetary Reduction Gearbox manufacturer

Product Description

PROFESSIONAL MANUFACTURE
— SINCE 1995

Hydraulic Motor Planetary Reduction Gearbox

Chinese electric motor speed reducer is widely used in mining machinery, chemical industry,steel metallurgy, light

industry,environmental protection, paper making, printing, lifting transport, food industry and so on.

Main Series Product: R series helical gear motor reducer, K series spiral bevel gear reducer, NGW, P series planetary gear reducer, H B series helical gearbox, Z (ZDY, ZLY, ZSY, and ZFY) serial hard tooth surface cylindrical gearbox reducer, D (DBY and DCY) serial hard tooth surface cone gear reducer, cycloidal speed reducer, etc. Meanwhile, map sample processing business can be undertaken.

Product Description

 

Adopts modular design, which can be changed and combined according to customer requirements;

Adopts involute planetary gear transmission, uses internal and external meshing and power splitting;

The gears are all treated by carburizing and quenching to obtain a high-hard wear-resistant surface.

After heat treatment, the gears are all ground, which reduces noise and improves the efficiency and service life of the whole machine.

Light weight, small volume, large transmission ratio range, high efficiency, stable operation, low noise and strong adaptability.

Product Parameters

 

Size

Type

Transmission Ratio

Type

Transmission Ratio

 

 

9/10/11/12/13/14/
15/16/17/18/19/20
/21/22/23/24/25/26
/27/28/29/30/31/
32/33/34

P2NA/P2NB/
P2NC/P2ND

25/28/31.5/40

P3NA/P3NB/P3NC/P3ND

140/160/180/
200/225/250/280

N=Coaxial

S=Helical gear

L=Bevel gear

K=Bevel-helical A=Hollow shaft with shrink disc

B=Solid shaft with parallel key

C=Hollow shaft with involute splines

D=Solid shaft with involute splines

P2SA/P2SB/
P2SC/P2SD

45/50/56/63
/71/80/90/100/
112/125

P3SA/P3SB/P3SC/P3SD

280/315/355/400
/450/500/560/630/
710/800/900

P2LA/P2LB/
P2LC/P2LD

31.5/40/45/50
/56/63/71/80
/90/100

P3KA/P3KB/P3KC/P3KD

560-4000

P2KA/P2KB/
P2KC/P2KD

112/125/140/160/
180/200/
225/250/320/360/
400/450/500/560

 

Model selection for washing machine Gear Box Transmission:
Closely using the ideal reduction ratio.
Reduction ratio = servo motor speed / reducer output shaft speed
Torque calculation: Torque calculation is very important for the life of reducer, and pay attention to whether the maximum torque value (TP) of acceleration exceeds the maximum load torque of the reducer.
The applicable power is usually the applicable power of the servo models on the market, the applicability of the reducer is very high, the working coefficient can be maintained above 1.2, but the choice can also be based on their own needs to decide. industrial helical gearbox. 

Detailed Photos

Chinese Speed Reducer/industrial helical gearbox is a mechanical transmission in many fields of the national economy. The product categories covered by the industry include all kinds of gear reducer, planetary gear reducer and worm reducer, as well as various special transmission devices such as speed increasing device, speed control Devices, including various types of flexible transmission devices, such as compound transmission. Products and services in the field of metallurgy, nonferrous metals, coal, building materials, ships, water conservancy, electricity, construction machinery and petrochemical industries.

In all fields of national economy and national defense industry, gearbox products have a wide range of applications. Food light industry, electric machinery, construction machinery, metallurgy machinery, cement machinery, environmental protection machinery, electronic appliances, road construction machinery, water conservancy machinery, chemical machinery, mining machinery, conveyor machinery, building materials machinery, rubber machinery, petroleum machinery and other industries have strong demand of Reducer products.

 

Packaging & Shipping

 

Application

 

Driven machines
Waste water treatment Thickeners,filter presses,flocculation apparata,aerators,raking equipment,combined longitudinal and rotary rakes,pre-thickeners,screw pumps,water turbines,centrifugal pumps Dredgers Bucket conveyors, dumping devices, carterpillar travelling gears, bucket wheel excavators as pick up, bucket wheel excavator for primitive material, cutter head, traversing gears
Chemical industry Plate bending machines, extruders, dough mills, rubbers calenders, cooling drums, mixers for uniform media, agitators for media with uniform density, toasters, centrifuges Metal working mills plate tilters, ingot pushers, winding machines, cooling bed transfer frames, roller straigheners, table continuous intermittent, roller tables reversing tube mills, shears continuous, casting drivers, reversing CZPT mills
Metal working mills Reversing slabbing mills. reversing wire mills, reversing sheet mills, reversing plate mill, roll adjustment drives Conveyors Bucket conveyors, hauling winches, hoists, belt conveyors, good lifts, passenger lifts, apron conveyors, escalators, rail travlling gears
Frequency converters Reciprocating compressors
Cranes Slewing gears, luffing gears, travelling gears, hoisting gear, derricking jib cranes Cooling towers Cooling tower fans, blowers axial and radial
Cane sugar production Cane knives, cane mills Beet sugar production Beet cossettes macerators, extraction plants, mechanical refrigerators, juice boilers, sugar beet washing machines, sugar beet cutter
Paper machines Pulper drives Cableways Material ropeways, continuous ropeway
Cement industry Concrete mixer, breaker, rotary kilns, tube mills, separators, roll crushers    

Company Profile

 

Established in 1995 , HangZhou Boji Machinery is a professional manufacturer and exporter that is concerned with the design, development and production of Gearbox Speed Reducer. We are located in HangZhou of ZheJiang Province, with convenient transportation access. With our own brand “TianQi”, all of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our company possesses complete machining center, lathe, gear shaping machine, gear milling machine, gear grinding machine and assembling lines. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
Besides, In 2005,we attained ISO9001 certification. As a result of our high quality products and outstanding customer service, we have gained a global sales network CZPT South America, Saudi Arabia, Vietnam, Pakistan, Philippines, South Africa and other countries and regions.
With rich export experience, high quality products, competitive prices, good service and in-time delivery, we certain that we can meet all of your requirement and exceed your expectations. Our feature is bright with new cooperative relationships with companies from all over the world. We look CZPT to speaking with you to future discuss how we can be of service to you.

FAQ

1. Who are we?
We are the Factory, with over 25 years of production experience, based in ZheJiang , China, start from 1995,sell to Domestic Market(50.00%),Mid East(10.00%),Southeast Asia(10.00%),Western Europe(5.00%),South America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),North America(3.00%),Africa(2.00%),Southern Europe(2.00%),South Asia(2.00%),Central America(1.00%).

2. Can you customize according to our requirements?
Yes, we can design nonstandard products according to customer’s drawing and sample.

3.What can you buy from us?
speed reducer,gearbox,gear motor,pump,crusher

4. Why should you buy from us not from other suppliers?
Founded in 1995, with over 20 years of production experience and credibility. With professional engineer team, advanced technology production and skilled workers.Specialized in the production of reducer. Map sample processing business can be undertaken.

5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian

 

Application: Motor, Machinery, Manufacturing Plant
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|

Order Sample

Hydraulic Motor Planetary Reduction Gearbox
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

planetarygearbox

Planetary Gearbox Components

The basic components of a planetary gearset are an input, output, and stationary position. Different types of planetary gearboxes will have different output ratios and torques. A leading company for planetary gearbox design, CZPT, provides the necessary components. These components can vary in both male and female shafts and come with a variety of modular options. Here are a few things to consider about each component.

CFHK Series

The CFHK Series is a multistage planetary gearbox that contains multiple planetary gears. The multiple teeth of each planetary gear mesh simultaneously during operation to increase the transmittable torque. The gears are case hardened and ground, and the ratios of the planetary gears are integers. They were first functionally described by Leonardo da Vinci in 1490. Today, the CFHK Series is a favorite among automotive engineers and manufacturers.
The CH Series offers high accuracy with a compact design and case hardened, hypoid, and helical gearing. These gearboxes are also available in the CFXR series, with low backlash and friction. These planetary gearboxes are designed to provide high torque and high precision in a variety of applications. In addition, the CFXR series features 100% helical gearing and low backlash.
The CFHK Series features a sun gear that drives the next stage. These gears can be put in series or serially in the same housing. In some cases, the output shaft of the first stage becomes the input shaft of the second stage. In addition, ring gears are also used as structural parts of smaller gearboxes. An example of a planetary gearbox is the pencil sharpener mechanism. The pencil is placed on an axis that is set on a sun gear. The sun gear drives the next planet stage.
A planetary gear unit’s gear ratio is determined by the number of teeth in the sun gear and ring gear. The smaller the sun gear, the smaller the ratio between the sun gear and planet gears. The largest gear ratio in a planetary gear unit is 10:1. A higher number of teeth increases the transmission ratio. In order to maximize torque, the planetary gears must be rearranged. A smaller sun gear will have higher torque than a large ring gear.

CFX Series

The HPN Harmonic Planetary(r) Series planetary gearboxes offer a low-cost solution with high-performance and high-reliability. This modular design is easy to install and requires very little maintenance. Its planetary design and full complement of needle rollers allow for extended life and quiet operation. In addition, the HPN Harmonic Planetary(r) Series is available in a range of sizes.
The compact size and high-speed design of planetary gearboxes results in excellent heat dissipation. However, high-speed or sustained performance applications may require lubricants. A planetary gearbox will have smaller minimum steps to minimize noise and vibration. Planetary gears will give you the highest level of efficiency while minimizing noise. As a result, they can provide high-quality 3D prints.
A planetary gear train is composed of a ring gear and planet gears, each supported by a carrier. A ring gear is pink, while the sun gear is red. The sun gear and carrier rotate around each other at a 45-degree angle. This is also known as an epicyclic gear. Planetary gearboxes are often found in space-constrained applications. The CFX Series features a compact design and excellent performance.
The CFX Series features a robust design that is easy to install. Its compact size makes installation of planetary gearboxes easier and faster. They are available in three different configurations for continuous, intermittent, and counter-clockwise operation. The CFX Series offers the perfect solution for your accelerating needs. They’re a great solution for any automotive or industrial application. You can easily configure the CFX Series to meet your specific requirements.

CAP Series

The Candy Controls CAP Series is a new generation of compact, precision planetary gearboxes that combine high torques with low backlash and exceptional wear resistance. This rotary flange planetary gearbox is ideal for a variety of industrial, mining and marine applications. Its modular construction enables users to easily mount different stages, hydraulic or electric motors, and different types of gears. Its CPH Series features an extremely rigid alloy steel housing, carburized gears, and induction hardened gears.
The CAP Series utilizes multiple planetary gears for high torque transmission. The number of planetary gears is not fixed, but most planetary gearboxes utilize at least three. The larger the number of planetary gears, the higher the transmittable torque. A planetary gearbox is composed of multiple planetary gears with a meshing action that occurs simultaneously during operation. The result is a higher efficiency and a smoother, quieter operation than a conventional gearbox.
The VersaPlanetary range features modular design for easy installation. This system includes mounting plates for typical FIRST (r) Robotics Competition motors. The mounting plates are designed to fit each motor. These planetary gearboxes are compatible with various types of motors, from small electric motors to large, heavy duty ones. They are also compatible with a variety of mounting systems, including CIM motors.
planetarygearbox

CAPK Series

The CZPT APK Series is a high precision, rotary flange style planetary gearbox. Its case hardened and ground gears are designed to provide excellent wear resistance, low backlash, and excellent precision. The CAPK Series offers high axial and moment load capacities in a compact housing. CZPT is the world leader in the production of planetary gearboxes. The CAPK Series features an array of high-quality, innovative features.
CZPT SMART Lubrication technology is used to keep the gears well-lubricated and reduce noise and vibration. The planetary gearbox’s 3-gear design is ideal for DIY CNC robotics. This series has a long history of quality, and CZPT uses only the best components. The CZPT 3:1 High Precision Planetary Gearbox is an excellent choice for CNC Robotics and other applications.
A multi-stage planetary gearbox combines individual ratios for a greater number of ratios. Additional planetary gears increase the transmittable torque. The direction of the output and drive shaft are always identical. The CAPK Series features a high-quality, durable construction. They are made from stainless steel and offer a long-term warranty. They are the best choice for industrial and commercial applications. While planetary gears are more expensive, they are highly efficient.

CFH Series

The Candy CFH Series planetary gearboxes offer the benefits of a modular design and a low backlash. They offer a variety of size options and excellent durability. This planetary gearbox is compact and wear resistant. The CFH Series planetary gearbox has a carburized, induction hardened gears and a rigid alloy steel housing. Its low backlash and precision make it an excellent choice for industrial applications.
The CFH Series planetary gearbox is a highly efficient, high-speed helical gear. The compact design of this gearbox results in high heat dissipation and low mass inertia. Planet carrier bearings experience significant lateral forces from the transmission of torque. As a result, radial and axial forces oppose each other. The result is that the torque is distributed over three gears, reducing noise, vibration, and wear.
The planetary gearbox has three main components: a sun gear (also known as the input gear), a ring gear, and two planet gears. These are connected by a carrier that rotates about a 45-degree clockwise axis. The CFH Series of gears is available in triple and double stages. They can also be used in electric motors. As a result, the CFH Series is highly versatile.
The CFH Series of planetary gearboxes can be found in all kinds of applications, including automotive transmissions. Their compact design and high-performance performance make them a popular choice for space-constrained applications. This gearbox has several benefits and is a great alternative to a conventional helical gearbox. These gearboxes are highly effective for reducing torque and speed, and are compact enough to fit in most applications.
planetarygearbox

CZPT

If you need a high-quality planetary gearbox, the CZPT Planetary Series is the right choice. This Italian company designs and manufactures gearboxes in its San Polo d’Enza, Italy, facility with 11 branch offices and three production facilities. The company is attempting to replicate the success of the Italian Super Car industry, which has gained global recognition. The company provides a range of gearboxes for use in heavy industry, agriculture, offshore, aerial and marine work.
With over 40 years of experience, CZPT manufactures a wide range of high-quality gearboxes. From bevel-helical units to Helical units, wheel gears and negative brakes, the company has been manufacturing quality components for many industries. CZPT is a trusted Australian distributor of CZPT gear components. The company is dedicated to providing the best planetary gears for every industry.
If your CZPT Planetary gearbox is malfunctioning, you can have it repaired quickly and easily. The company uses quality materials and a variety of sizes and output ratios to cater to the most demanding applications. In addition, you can customize your gearbox to suit your specific needs. CZPT Planetary Gearboxes are highly versatile and customizable, offering infinite scalability.

China OEM Hydraulic Motor Planetary Reduction Gearbox   manufacturer China OEM Hydraulic Motor Planetary Reduction Gearbox   manufacturer
editor by CX 2023-10-25

China Hot selling P Series Hydraulic Planetary Gearbox Reducer Conveyor Feed Mixer Gearbox 24V DC Motor Reducer Planetary Concrete Gearbox with Best Sales

Product Description

 

Product Name

Best price of P series planetary gearbox for concrete mixer

Series

gear reducer

Application

Power Tranmission

Bearing

China Top brand HRB,LYC,ZWZ or other brands requested, NSK

Used

industry machinery

 

Product Description

 

1.P series planetary gear reducer is widely used in metallurgy , mining, lifting and transport , electricity, energy , building
materials, light industry, transportation and other industrial sectors.

2. P series planetary gear involute planetary gear transmission , within a reasonable use, external gear , power split .

3. The planetary gear modular design changes can be combined according to customer requirements.

4.Carburized gears are used to obtain high- hard wear-resistant surface , all the heat treatment after grinding gear teeth ,
reduce noise , improve the overall efficiency and service life.

5. Hight quality gear reducer , small transmission ratio range , high efficiency, smooth operation, low noise adaptability and
other characteristics .

1 . Input: concentric shaft input , the helical gear input , bevel – helical gear input, bevel gear input.

2 . Output: the splined inner, hollow shaft shrink disc, splined outer, CZPT shaft flat key .

3.The planetary gear involute planetary gear transmission, within a reasonable use of external gear, power split. Therefore,light weight, small size, transmission ratio range, high efficiency, smooth operation, low noise, strong adaptability and other
characteristics.

4 . Box with ductile iron, greatly improving cabinet rigidity and shock resistance.

5 . Modular design , according to customer requirements to change the combination types .

6 . The installation forms : horizontal and vertical installation, torque arm mounting

7 . Combined with R series , K series to get greater ratio .
 

Company Profile

Certifications

Packaging & Shipping

FAQ

Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Planetary
Step: Single-Step
Type: Gear Reducer
Samples:
US$ 100000/Piece
1 Piece(Min.Order)

|
Request Sample

planetarygearbox

Planetary Gearbox Advantages and Disadvantages

A planetary gearbox is a type of mechanical drive with a single output shaft. They are suitable for both clockwise and counterclockwise rotations, have less inertia, and operate at higher speeds. Here are some advantages and disadvantages of this type of gearbox. Let us see what these advantages are and why you should use them in your applications. Listed below are some of the benefits of planetary gearboxes.

Suitable for counterclockwise and clockwise rotation

If you want to teach children about the clock hands, you can buy some resources for counterclockwise and asymmetrical rotation. These resources include worksheets for identifying degrees of rotation, writing rules for rotation, and visual processing. You can also use these resources to teach angles. For example, the translation of shapes activity pack helps children learn about the rotation of geometric shapes. Similarly, the visual perception activity sheet helps children understand how to process information visually.
Various studies have been done to understand the anatomical substrate of rotations. In a recent study, CZPT et al. compared the position of the transitional zone electrocardiographically and anatomically. The authors found that the transitional zone was normal in nine of 33 subjects, indicating that rotation is not a sign of disease. Similarly, a counterclockwise rotation may be caused by a genetic or environmental factor.
The core tip data should be designed to work in both clockwise and counterclockwise rotation. Counterclockwise rotation requires a different starting point than a clockwise rotation. In North America, star-delta starting is used. In both cases, the figure is rotated about its point. Counterclockwise rotation, on the other hand, is done in the opposite direction. In addition, it is possible to create counterclockwise rotation using the same gimbal.
Despite its name, both clockwise and counterclockwise rotation requires a certain amount of force to rotate. When rotating clockwise, the object faces upwards. Counterclockwise rotation, on the other hand, starts from the top position and heads to the right. If rotating in the opposite direction, the object turns counterclockwise, and vice versa. The clockwise movement, in contrast, is the reverse of counterclockwise rotation.

Has less inertia

The primary difference between a planetary gearbox and a normal pinion-and-gear reducer is the ratio. A planetary gearbox will produce less inertia, which is an important advantage because it will reduce torque and energy requirements. The ratio of the planetary gearbox to its fixed axis counterpart is a factor of three. A planetary gearbox has smaller gears than a conventional planetary, so its inertia is proportional to the number of planets.
Planetary gears are less inertia than spur gears, and they share the load across multiple gear teeth. This means that they will have low backlash, and this is essential for applications with high start-stop cycles and frequent rotational direction changes. Another benefit is the high stiffness. A planetary gearbox will have less backlash than a spur gearbox, which means that it will be more reliable.
A planetary gearbox can use either spur or helical gears. The former provides higher torque ratings while the latter has less noise and stiffness. Both types of gears are useful in motorsports, aerospace, truck transmissions, and power generation units. They require more assembly time than a conventional parallel shaft gear, but the PD series is the more efficient alternative. PD series planetary gears are suitable for many applications, including servo and robotics.
In contrast, a planetary gear set can have varying input speed. This can affect the frequency response of the gearset. A mathematical model of the two-stage planetary gears has non-stationary effects and correlates with experimental findings. Fig. 6.3 shows an addendum. The dedendum’s minimum value is approximately 1.25m. When the dedendum is at its smallest, the dedendum has less inertia.
planetarygearbox

Offers greater reliability

The Planetary Gearbox is a better option for driving a vehicle than a standard spur gearbox. A planetary gearbox is less expensive, and they have better backlash, higher load capacity, and greater shock loads. Unlike spur gearboxes, however, mechanical noise is virtually nonexistent. This makes them more reliable in high-shock situations, as well as in a wide range of applications.
The Economy Series has the same power density and torque capacity of the Precision Helical Series, but it lacks the precision of the latter. In contrast, Economy Series planetary gearboxes feature straight spur planetary gearing, and they are used in applications requiring high torque. Both types of gearboxes are compatible with NEMA servo motors. If torque density is important, a planetary gearbox is the best choice.
The Dispersion of External Load: The SSI model has been extensively used to model the reliability of planetary gear systems. This model takes the contact force and fatigue strength of the system as generalized stress and strength. It also provides a theoretical framework to evaluate the reliability of planetary gear systems. It also has many other advantages that make it the preferred choice for high-stress applications. The Planetary Gearbox offers greater reliability and efficiency than traditional rack and pinion gear systems.
Planetary gearing has greater reliability and compact design. Its compact design allows for wider applications with concerns about space and weight. Additionally, the increased torque and reduction makes planetary gearboxes an excellent choice for a wide variety of applications. There are three major types of planetary gearboxes, each with its own advantages. This article describes a few of them. Once you understand their workings, you will be able to choose the best planetary gearbox for your needs.

Has higher operating speeds

When you look at planetary gearboxes, you might be confused about which one to choose. The primary issue is the application of the gearbox. You must also decide on secondary factors like noise level, corrosion resistance, construction, price, and availability worldwide. Some constructors work faster than others and deliver the gearboxes on the same day. However, the latter ones often deliver the planetary gearbox out of stock.
Compared to conventional gearboxes, a planetary gearbox can run at higher speeds when the input speed fluctuates. However, these gears are not very efficient in high-speed applications because of their increased noise levels. This makes planetary gears unsuitable for applications involving a great deal of noise. That is why most planetary gears are used in small-scale applications. There are some exceptions, but in general, a planetary gearbox is better suited for applications with higher operating speeds.
The basic planetary gearbox is a compact alternative to normal pinion-and-gear reducers. They can be used in a wide variety of applications where space and weight are concerns. Its efficiency is also higher, delivering 97% of the power input. It comes in three different types based on the performance. A planetary gearbox can also be classified as a worm gear, a spur gear, or a sprocket.
A planetary gearhead has a high-precision design and can generate substantial torque for their size. It also reduces backlash to two arc-min. Additionally, it is lubricated for life, which means no maintenance is needed. It can fit into a small machine envelope and has a small footprint. Moreover, the helical crowned gearing provides fast positioning. A sealed gearbox prevents abrasive dust from getting into the planetary gearhead.
planetarygearbox

Has drawbacks

The design of a planetary gearbox is compact and enables high torque and load capability in a small space. This gear arrangement also reduces the possibility of wear and tear. Planet gears are arranged in a planetary fashion, allowing gears to shift under load and a uniform distribution of torque. However, some disadvantages of planetary gears must be considered before investing in this gearbox.
While the planetary gearbox is a high precision motion-control device, its design and maintenance requirements are a concern. The bearing load is high, requiring frequent lubrication. Also, they are inaccessible. Despite these drawbacks, planetary gearboxes are suitable for a variety of tasks. They also have low backlash and high torsional stiffness, making them excellent choices for many applications.
As a result, the speed of a planetary gearbox varies with load and speed. At lower ratios, the sun gear becomes too large in relation to the planet gears. As the ratio increases, the sun gear will become too low, reducing torque. The planetary gears also reduce their torque in high-speed environments. Consequently, the ratio is a crucial consideration for planetary gearbox condition monitoring.
Excess drag may result from out-of-tolerance components or excessive lubrication. Drag should be measured both in directions and be within acceptable ranges. Grease and oil lubrication are two common planetary gearbox lubricants, but the choice is largely dependent on your application. While grease lubricates planetary gears well, oil needs maintenance and re-lubrication every few thousand hours.

China Hot selling P Series Hydraulic Planetary Gearbox Reducer Conveyor Feed Mixer Gearbox 24V DC Motor Reducer Planetary Concrete Gearbox   with Best Sales China Hot selling P Series Hydraulic Planetary Gearbox Reducer Conveyor Feed Mixer Gearbox 24V DC Motor Reducer Planetary Concrete Gearbox   with Best Sales
editor by CX 2023-06-12

China factory CZPT Factory P Series High Torque Hydraulic Gear Motor Planetary Gearbox for Concrete Mixer comer planetary gearbox

Product Description

Product Description

1.P series planetary gear reducer is widely used in metallurgy , mining, lifting and transport , electricity, energy , building

materials, light industry, transportation and other industrial sectors.

2. P series planetary gear involute planetary gear transmission , within a reasonable use, external gear , power split .

3. The planetary gear modular design changes can be combined according to customer requirements.

4.Carburized gears are used to obtain high- hard wear-resistant surface , all the heat treatment after grinding gear teeth ,
reduce noise , improve the overall efficiency and service life.

5. Hight quality gear reducer , small transmission ratio range , high efficiency, smooth operation, low noise adaptability and
other characteristics .

If you need to customize, please click here

Speed ratio range 

basic type 25 ~ 4000

 torque range

2.6 ~ 900knm

power range

22 ~ 1920kw

Installation form:

1. Horizontal installation / foot installation 2. Vertical installation / flange installation 3. Torsion arm installation.

Output mode

1. Hollow output shaft with shrink disc 2. CZPT output shaft with flat key 3. Hollow shaft with involute spline 4. CZPT shaft with involute spline

1 . Input: concentric shaft input , the helical gear input , bevel – helical gear input, bevel gear input.
2 . Output: the splined inner, hollow shaft shrink disc, splined outer, CZPT shaft flat key .
3.The planetary gear involute planetary gear transmission, within a reasonable use of external gear, power split. Therefore,light weight, small size, transmission ratio range, high efficiency, smooth operation, low noise, strong adaptability and other
characteristics.
4 . Box with ductile iron, greatly improving cabinet rigidity and shock resistance.
5 . Modular design , according to customer requirements to change the combination types .
6 . The installation forms : horizontal and vertical installation, torque arm mounting
7 . Combined with R series , K series to get greater ratio .

Detailed Photos

 

For more models or customization, please click here!

Click on the picture below for details

MOREPRODUCTS

 

 

 

Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Planetary
Step: Single-Step
Type: Gear Reducer
Samples:
US$ 1500/Piece
1 Piece(Min.Order)

|
Request Sample

planetarygearbox

Planetary Gearbox Components

The basic components of a planetary gearset are an input, output, and stationary position. Different types of planetary gearboxes will have different output ratios and torques. A leading company for planetary gearbox design, CZPT, provides the necessary components. These components can vary in both male and female shafts and come with a variety of modular options. Here are a few things to consider about each component.

CFHK Series

The CFHK Series is a multistage planetary gearbox that contains multiple planetary gears. The multiple teeth of each planetary gear mesh simultaneously during operation to increase the transmittable torque. The gears are case hardened and ground, and the ratios of the planetary gears are integers. They were first functionally described by Leonardo da Vinci in 1490. Today, the CFHK Series is a favorite among automotive engineers and manufacturers.
The CH Series offers high accuracy with a compact design and case hardened, hypoid, and helical gearing. These gearboxes are also available in the CFXR series, with low backlash and friction. These planetary gearboxes are designed to provide high torque and high precision in a variety of applications. In addition, the CFXR series features 100% helical gearing and low backlash.
The CFHK Series features a sun gear that drives the next stage. These gears can be put in series or serially in the same housing. In some cases, the output shaft of the first stage becomes the input shaft of the second stage. In addition, ring gears are also used as structural parts of smaller gearboxes. An example of a planetary gearbox is the pencil sharpener mechanism. The pencil is placed on an axis that is set on a sun gear. The sun gear drives the next planet stage.
A planetary gear unit’s gear ratio is determined by the number of teeth in the sun gear and ring gear. The smaller the sun gear, the smaller the ratio between the sun gear and planet gears. The largest gear ratio in a planetary gear unit is 10:1. A higher number of teeth increases the transmission ratio. In order to maximize torque, the planetary gears must be rearranged. A smaller sun gear will have higher torque than a large ring gear.

CFX Series

The HPN Harmonic Planetary(r) Series planetary gearboxes offer a low-cost solution with high-performance and high-reliability. This modular design is easy to install and requires very little maintenance. Its planetary design and full complement of needle rollers allow for extended life and quiet operation. In addition, the HPN Harmonic Planetary(r) Series is available in a range of sizes.
The compact size and high-speed design of planetary gearboxes results in excellent heat dissipation. However, high-speed or sustained performance applications may require lubricants. A planetary gearbox will have smaller minimum steps to minimize noise and vibration. Planetary gears will give you the highest level of efficiency while minimizing noise. As a result, they can provide high-quality 3D prints.
A planetary gear train is composed of a ring gear and planet gears, each supported by a carrier. A ring gear is pink, while the sun gear is red. The sun gear and carrier rotate around each other at a 45-degree angle. This is also known as an epicyclic gear. Planetary gearboxes are often found in space-constrained applications. The CFX Series features a compact design and excellent performance.
The CFX Series features a robust design that is easy to install. Its compact size makes installation of planetary gearboxes easier and faster. They are available in three different configurations for continuous, intermittent, and counter-clockwise operation. The CFX Series offers the perfect solution for your accelerating needs. They’re a great solution for any automotive or industrial application. You can easily configure the CFX Series to meet your specific requirements.

CAP Series

The Candy Controls CAP Series is a new generation of compact, precision planetary gearboxes that combine high torques with low backlash and exceptional wear resistance. This rotary flange planetary gearbox is ideal for a variety of industrial, mining and marine applications. Its modular construction enables users to easily mount different stages, hydraulic or electric motors, and different types of gears. Its CPH Series features an extremely rigid alloy steel housing, carburized gears, and induction hardened gears.
The CAP Series utilizes multiple planetary gears for high torque transmission. The number of planetary gears is not fixed, but most planetary gearboxes utilize at least three. The larger the number of planetary gears, the higher the transmittable torque. A planetary gearbox is composed of multiple planetary gears with a meshing action that occurs simultaneously during operation. The result is a higher efficiency and a smoother, quieter operation than a conventional gearbox.
The VersaPlanetary range features modular design for easy installation. This system includes mounting plates for typical FIRST (r) Robotics Competition motors. The mounting plates are designed to fit each motor. These planetary gearboxes are compatible with various types of motors, from small electric motors to large, heavy duty ones. They are also compatible with a variety of mounting systems, including CIM motors.
planetarygearbox

CAPK Series

The CZPT APK Series is a high precision, rotary flange style planetary gearbox. Its case hardened and ground gears are designed to provide excellent wear resistance, low backlash, and excellent precision. The CAPK Series offers high axial and moment load capacities in a compact housing. CZPT is the world leader in the production of planetary gearboxes. The CAPK Series features an array of high-quality, innovative features.
CZPT SMART Lubrication technology is used to keep the gears well-lubricated and reduce noise and vibration. The planetary gearbox’s 3-gear design is ideal for DIY CNC robotics. This series has a long history of quality, and CZPT uses only the best components. The CZPT 3:1 High Precision Planetary Gearbox is an excellent choice for CNC Robotics and other applications.
A multi-stage planetary gearbox combines individual ratios for a greater number of ratios. Additional planetary gears increase the transmittable torque. The direction of the output and drive shaft are always identical. The CAPK Series features a high-quality, durable construction. They are made from stainless steel and offer a long-term warranty. They are the best choice for industrial and commercial applications. While planetary gears are more expensive, they are highly efficient.

CFH Series

The Candy CFH Series planetary gearboxes offer the benefits of a modular design and a low backlash. They offer a variety of size options and excellent durability. This planetary gearbox is compact and wear resistant. The CFH Series planetary gearbox has a carburized, induction hardened gears and a rigid alloy steel housing. Its low backlash and precision make it an excellent choice for industrial applications.
The CFH Series planetary gearbox is a highly efficient, high-speed helical gear. The compact design of this gearbox results in high heat dissipation and low mass inertia. Planet carrier bearings experience significant lateral forces from the transmission of torque. As a result, radial and axial forces oppose each other. The result is that the torque is distributed over three gears, reducing noise, vibration, and wear.
The planetary gearbox has three main components: a sun gear (also known as the input gear), a ring gear, and two planet gears. These are connected by a carrier that rotates about a 45-degree clockwise axis. The CFH Series of gears is available in triple and double stages. They can also be used in electric motors. As a result, the CFH Series is highly versatile.
The CFH Series of planetary gearboxes can be found in all kinds of applications, including automotive transmissions. Their compact design and high-performance performance make them a popular choice for space-constrained applications. This gearbox has several benefits and is a great alternative to a conventional helical gearbox. These gearboxes are highly effective for reducing torque and speed, and are compact enough to fit in most applications.
planetarygearbox

CZPT

If you need a high-quality planetary gearbox, the CZPT Planetary Series is the right choice. This Italian company designs and manufactures gearboxes in its San Polo d’Enza, Italy, facility with 11 branch offices and three production facilities. The company is attempting to replicate the success of the Italian Super Car industry, which has gained global recognition. The company provides a range of gearboxes for use in heavy industry, agriculture, offshore, aerial and marine work.
With over 40 years of experience, CZPT manufactures a wide range of high-quality gearboxes. From bevel-helical units to Helical units, wheel gears and negative brakes, the company has been manufacturing quality components for many industries. CZPT is a trusted Australian distributor of CZPT gear components. The company is dedicated to providing the best planetary gears for every industry.
If your CZPT Planetary gearbox is malfunctioning, you can have it repaired quickly and easily. The company uses quality materials and a variety of sizes and output ratios to cater to the most demanding applications. In addition, you can customize your gearbox to suit your specific needs. CZPT Planetary Gearboxes are highly versatile and customizable, offering infinite scalability.

China factory CZPT Factory P Series High Torque Hydraulic Gear Motor Planetary Gearbox for Concrete Mixer   comer planetary gearboxChina factory CZPT Factory P Series High Torque Hydraulic Gear Motor Planetary Gearbox for Concrete Mixer   comer planetary gearbox
editor by CX 2023-04-25

China hydraulic motor planetary gearbox for pet food corotating twin screw extruder automatic planetary gearbox

Error:获取返回内容失败,
Your session has expired. Please reauthenticate.

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetarygearbox

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

China hydraulic motor planetary gearbox for pet food corotating twin screw extruder     automatic planetary gearbox	China hydraulic motor planetary gearbox for pet food corotating twin screw extruder     automatic planetary gearbox
editor by czh 2023-02-14

in Abu Dhabi United Arab Emirates sales price shop near me near me shop factory supplier Planetary Gearbox with Hydraulic Motor Bonfiglioli Type manufacturer best Cost Custom Cheap wholesaler

  in Abu Dhabi United Arab Emirates  sales   price   shop   near me   near me shop   factory   supplier Planetary Gearbox with Hydraulic Motor  Bonfiglioli Type manufacturer   best   Cost   Custom   Cheap   wholesaler

If you are intrigued in any of our merchandise or would like to examine a potential order, you should feel free to contact us. Our principal merchandise are Needle Roller bearings, Cylindrical Roller Bearings, Rod conclude Bearings, Spherical simple bearings, Monitor roller Bearings for Guideway, Roller Bearings, Merge Bearings for forklifts, H2o Pump Bearings, SNR Vehicle Bearings and all types of Spherical Bearings. With in depth requirments, we can also build your specific developed product. Planetary EPTT with EPT EPT (N) EPTT Sort EPTnical data:
1. Ratio variety: 3.15-9000
two. Input EPTT: .25-55KW
three. Allow torque rang: le 800000N. M
4. Output pace: .425-445 r/min
5. Structure mode: Possibility of flange, foot, or shaft mounting solutions

Planetary EPTT with EPT EPT (N) EPTT Type Attribute:
one. Broad and extensive selection of N collection for EPTT purposes
2. Lower pace shaft design: Cylindrical with crucial, splined, hollow with shrink disc or splined hollow shaft
3. Rigid and exact nodular forged iron casing
4. Lower sounds operating, large producing high quality stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd
5. EPT and reliable efficiency, load capacity and minimal velocity shaft bearing

Ratio 3.fifteen:1 to 9000:one
Reduction Phases up to 6 reduction levels in 1 EPTT
Nominal Output Torque up to 800,000N.m

  in Abu Dhabi United Arab Emirates  sales   price   shop   near me   near me shop   factory   supplier Planetary Gearbox with Hydraulic Motor  Bonfiglioli Type manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Abu Dhabi United Arab Emirates  sales   price   shop   near me   near me shop   factory   supplier Planetary Gearbox with Hydraulic Motor  Bonfiglioli Type manufacturer   best   Cost   Custom   Cheap   wholesaler

in Houston United States sales price shop near me near me shop factory supplier Rexroth A6VM28 A6VM55 A6VM80 A6VM107 hydraulic piston motor A6VM107EZ1 63W-VSD520HB manufacturer best Cost Custom Cheap wholesaler

  in Houston United States  sales   price   shop   near me   near me shop   factory   supplier Rexroth A6VM28 A6VM55 A6VM80 A6VM107 hydraulic piston motor A6VM107EZ1 63W-VSD520HB manufacturer   best   Cost   Custom   Cheap   wholesaler

The large specific CNC products, this kind of as Sluggish-feeding wire-reduce device, jig grinding equipment and electrical discharge device, assures the prime high quality precision of mould processing, with the substantial successful and environmental defense acid rolling line currently being the premier raw content converting tools in the discipline in china The wildly use of automatic milling device, substantial-speed automatic feeding punch, high speed automatic rolling and assembling machine ensures the high quality and efficiency of parts and chain producing. Sophisticated thermo treatment gear, such as community warmth treatment method oven, multi-use thermo treatment oven, etc. Our AdvantagesProducts Big volume in Stock, No MOQ needed We comply with all the global specifications, this sort of as ISO9001 and TS16949 expectations.

Functions

–Variable motor with aXiHu (West EPT) Dis.al EPTTred piston rotary team of bent aXiHu (West EPT) Dis.s design and style, for hydrostatic EPTs in open and closed circuits
–For use in cell and stationary apps
-The broad handle assortment enables the variable motor to satisfy the need for large pace and high torque.
–The displacement can be infinitely changed from Vg max to Vg min = . –The output pace is dependent on the circulation of the pump and the displacement of the motor. The output torque increases with the pressure differential in between the substantial-strain and reduced-stress facet and with escalating displacement.
–Broad management assortment with hydrostatic EPTTs
-Extensive assortment of handle devices
-Cost personal savings via elimination of EPT shifts and chance of employing more compact pumps
–Compact, robust motor with EPTT provider daily life
-EPT EPTT density
-Excellent commencing qualities
-Tiny swing torque

About us

HangEPT everEPTT EPTT, Ltd is a professional business built-in with EPT merchandise manufacture, trade and technological support. We emphasis on excellent good quality, EPT services, realistic cost and provide extensive answer incXiHu (West EPT) Dis.Hu (West EPT) Dis. free of charge maintenance suggestion and expert. We provide throughout the world brand EPT product such as Bosch EPT, Sauer,Danfoss, Vikers, Cater, Kawasaki, Linde, EPT, EPT and etc. We exoported to a lot more than 110 buyers in 89 nations around the world these kinds of as The usa, Canada, MeXiHu (West EPT) Dis.co, Peru, Russia, Czeck, Slovakia, Moroco, Gana, TEPTTd, India and and so forth.

Lifestyle: Get EPTT of consumers and provide based mostly on morality, Concentrate on top quality to advantage customers.

Principal products are globle and EPTT brand EPT principal pump, synchronous EPTTt motor, valve and and so on.. We give most of EPT merchandise to construction EPTTry, agricultural EPTTry, EPTT EPTTs, coking EPTTs, chemical EPTTs, marine EPTTry, port EPTTry, oil subject EPTTry, coal mining EPTTry, large EPTTry processing EPTT and and so on.. in which the specific equipment incEPTTs concrete mixer EPT, underground scraper, grain blend harvester, large floor clearance spraying EPTT, concrete pump EPT, street roller, paver, rotary drilling rig, industrial garden motor vehicle, hand roller, modest driving roller, Tiny transportation EPT, minitype sweeper, mini slip loader, winch products and all sorts of gear unEPTT2 tons capacity with continuously variable velocity driving methods.

FAQ

Q: Are you buying and selling organization or producer ?
A: We are manufacture and buying and selling organization .

Q: What is your primary application
A: 1.EPT method
two.EPTT EPTT
3.EPTT EPTT
four.EPTT
5.Neighborhood distributors

Q: How EPTT is your shipping and delivery time?
A: EPTTly it is five-10 daEPTTif the merchandise are in inventory. or it is fifteen-twenty daEPTTif the goods are not in inventory, it is in accordance to amount.

Q: What is your conditions of payment?
A: Payment lt=1000USD,a hundred% in EPT,
Payment gt1000USD,100% in EPT or 30%T/T in EPT,stability ahead of delivery.

Q: Do you have any guarantee on the quality of your valves?
A: As EPTT as the pumps ampmotors are from EPTEPTTn XiHu (West EPT) Dis.hu (West EPT) Dis. , we promise that the good quality assurance time period is a single 12 months. If the goods have any dilemma on top quality within this period of time, we all give guarantee provider. If they have been mounted, we will give technological staff to help solve the difficulty.

Q:If we have a big quantity of pumps ampmotors, can you give us a low cost?
A: We provide unified EPTTsale price to buyers. No subject you purchase one particular or hundreds of pumps ampmotors, we attempt our greatest to give you advantage, because we want to build EPTT-expression cooperation partnership with you.

  in Houston United States  sales   price   shop   near me   near me shop   factory   supplier Rexroth A6VM28 A6VM55 A6VM80 A6VM107 hydraulic piston motor A6VM107EZ1 63W-VSD520HB manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Houston United States  sales   price   shop   near me   near me shop   factory   supplier Rexroth A6VM28 A6VM55 A6VM80 A6VM107 hydraulic piston motor A6VM107EZ1 63W-VSD520HB manufacturer   best   Cost   Custom   Cheap   wholesaler

China manufacturer & factory supplier for china in Bhubaneswar India factory supplier hydraulic drive wheel motor hydraulic gear motor With high quality best price & service

China manufacturer & factory supplier for china  in Bhubaneswar India  factory supplier hydraulic drive wheel motor hydraulic gear motor With high quality best price & service

Even though we just take prideOUR Basic Segment: Software-Proper PRECISION in being “Collar Specialists”, our expertise in sourcing top quality goods has produced Lucas Industrial a valued provider of other power transmission products as properly. 1st between these are linear bearings with interchanges available for virtually all types and measurements. Other electricity transmission items obtainable through Lucas Industrial incorporate leaf chain, roller chain, lumber conveying chain, rigid couplings, ball bearings, and sprockets.We will offer greatest services and substantial good quality items with all sincerity. a specialised provider of a full selection of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….

Overview

Fast Details

Right after Warranty Support:

Video clip specialized support

Local Service Location:

Egypt

Showroom Place:

Egypt

Variety:

components

Right after-income Services Presented:

Online video technological help

Supply Potential

Provide Potential:
3000 Piece/Parts per Month

Packaging & Shipping and delivery

Packaging Specifics
Carton or Plywood scenario

Online Customization

We developed, specifically for our buyers, a protective cone which is versatile and permits simpler handling whilst coupling the PTO on the tractor or functioning machine. The adaptable cone delivers extra comfort and ease when coupling the PTO, since you can get a very good grip in the minimal shaft room.

 hydraulic oil hagglunds hydraulic motor

china factory supplier hydraulic drive wheel motor hydraulic gear motor

 

 

 

 

one. This series of motor are tiny quantity, cost-effective type,  which is made with Spool Valve, which adapt the gerotor equipment established layout and offer compact quantity, higher power and lower weight.

 

two. Advanced production gadgets for the Gerotor gear established, which provide tiny quantity, high effectiveness and prolonged existence.

 

three. Shaft seal can bear substantial strain of motor of which can be used in parallel or in collection.

 

four. Superior development style, high electrical power and lower weight.

 

5. BMP series is equal to Danfoss “OMP” sequence and Charlynn “H” sequence, and also can substitute for White, Parker.

 

 

Technical DATA 

 

Our business has strong economic toughness, builds up a technician group contingent with substantial high quality, possesses the creation assembly line of technicalization in China and perfect system examining on product high quality and runs advertising networks all through the nation.

TYPE BMP-fifty BMP-eighty BMP-one hundred BMP-125 BMP-a hundred and sixty BMP-two hundred BMP-250 BMP-315 BMP-400
Displacement(ml/r) 52.9 79.3 98.two a hundred and twenty.nine 158.seven 196.4 241.8 317.three 392.9
Max.Strain.Fall(Mpa) cont. fourteen 14 14 fourteen 14 14 eleven 9 7
int. 17.5 17.5 seventeen.five 17.five 17.five seventeen.5 14 11 9
peak. 20 20 20 twenty 20 20 16 thirteen eleven
Max.torque(N.m) cont. 89 150 191 235 307 365 378 378 378
int. a hundred and ten 185 231 292 376 440 465 465 465
peak. 130 215 268 336 430 506 537 537 537
Speed.Selection(cont.)(r/min) 10-800 10-770 9-615 nine-480 eight-385 seven-310 5-250 5-195 5-one hundred fifty five
Max.Stream(cont.)(L/min) 40 60 60 60 60 sixty 60 60 60
Max.Output.Energy(cont.)(Kw) 7 ten 10 ten ten 8 six five four
Weight(kg) 5.6 5.7 5.nine six 6.2 6.4 6.six six.9 seven.four

 

 

Much more Merchandise

 

 

Packaging & Shipping

 

china factory supplier hydraulic drive wheel motor hydraulic gear motor

 

Business Data

  

 

FAQ

 

 

Our Solutions

 

 

 

Get in touch with US

 

China manufacturer & factory supplier for china  in Bhubaneswar India  factory supplier hydraulic drive wheel motor hydraulic gear motor With high quality best price & service

China manufacturer & factory supplier for china  in Bhubaneswar India  factory supplier hydraulic drive wheel motor hydraulic gear motor With high quality best price & service

China manufacturer & factory supplier for china  in Bhubaneswar India  factory supplier hydraulic drive wheel motor hydraulic gear motor With high quality best price & service

China manufacturer & factory supplier for china  in Bhubaneswar India  factory supplier hydraulic drive wheel motor hydraulic gear motor With high quality best price & service

China manufacturer & factory supplier for china  in Bhubaneswar India  factory supplier hydraulic drive wheel motor hydraulic gear motor With high quality best price & service

China manufacturer & factory supplier for china  in Bhubaneswar India  factory supplier hydraulic drive wheel motor hydraulic gear motor With high quality best price & service

China manufacturer & factory supplier for china  in Bhubaneswar India  factory supplier hydraulic drive wheel motor hydraulic gear motor With high quality best price & service

Best China manufacturer & factory China in Jiddah Saudi Arabia supplier hydraulic motor rail motor Seaton rail low speed high torque With high quality best price

Best China manufacturer & factory China  in Jiddah Saudi Arabia  supplier hydraulic motor rail motor Seaton rail low speed high torque With high quality best price

Our products are manufactured by modern computerized machinery and equipment.a specialized supplier of a full range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….

Overview

Quick Details

Condition:

New

After Warranty Service:

Online support

Local Service Location:

none

Showroom Location:

none

Type:

parts

Brand Name:

OEM

Place of Origin:Zhejiang, China
Pressure:
Product Expertise EPG have for decades supplied quality products into high integrity industries. With an unparalleled knowledge of applications and processes across multiple industries. EPG application engineers have the experience to specify the right product for your needs.

Structure:

Certification:

Weight:

Power(W):

Dimension(L*W*H):

After-sales Service Provided:

Video technical support

Color:

Silver

Supply Ability

Supply Ability:
500000 Piece/Pieces per Year

Packaging & Delivery

Packaging Details
Carton or Plywood case
Port
NINGBO/SHANGHAI, CHINA
Lead Time
:
Quantity(Bags) 1 – 50 >50
Est. Time(days) 15 To be negotiated

–Driven (outer) yoke same as drive yoke but is mounted on the implement. There are two types of shafts, domestic and metric, which are identifiable by their shapes. Domestic are generally one of four shapes: round, square, rectangle or splined. Metric are: bell, star or football shaped. In either case the primary (front) shaft is the same shape as the secondary shaft, only bigger so that the secondary shaft fits inside. This allows a telescoping effect to take place when the implement is raised on the 3 pt. or during a turning movement such as a bailer. All shafts have to be sized before use. Attach the implement to the 3 pt. and raise and support it. Attach the proper end to the tractor and attempt to attach the other to the implement. If the shaft is too long trim one of the shafts with a hack saw and try it again until it fits. This allows for the implement to be raised without binding. The shafts should overlap as much as allowed.

Online Customization

Our products are selling well in Chinese markets and some products sold in international markets are well received by Chinese and foreign clients at home and abroad.

China supplier hydraulic motor rail motor Seaton rail low speed high torque

TYPE   BMP-50
BMPH-50
BMP-80
BMPH-80
BMP-100
BMPH-100
BMP-125
BMPH-125
BMP-160
BMPH-160
BMP-200
BMPH-200
BMP-250
BMPH-250
BMP-315
BMPH-315
BMP-400
BMPH-400
Displcement
(ml/r)
  52.9 79.3 98.2 120.9 158.7 196.4 241.8 317.3 392.9
Max.Pressure. Drop
(Mpa)
cont. 14 14 14 14 14 14 12 10 8
int. 17.5 17.5 17.5 17.5 17.5 17.5 14 12 10
peak. 22 22 22 22 22 22 20 15 13
Max. torque
(N.Mm)
cont. 97 148 183 229 295 364 369 404 416
int. 125 189 238 292 382 470 444 501 531
peak. 149 222 276 340 445 532 568 555 596
Max. Speed
(cont.)(r/min)
  755 750 610 490 375 305 245 185 150
Max. Flow
(cont.)(L/min)
  40 60 60 60 60 60 60 60 60
Max. Output. Power
(cont.)(Kw)
  6.5 10 10 10 10 10 8 7 5.7
Weight(kg)   5.6 5.7 5.9 6 6.2 6.4 6.6 6.9 7.4

 

 

China supplier hydraulic motor rail motor Seaton rail low speed high torqueChina supplier hydraulic motor rail motor Seaton rail low speed high torqueChina supplier hydraulic motor rail motor Seaton rail low speed high torqueChina supplier hydraulic motor rail motor Seaton rail low speed high torque

Best China manufacturer & factory China  in Jiddah Saudi Arabia  supplier hydraulic motor rail motor Seaton rail low speed high torque With high quality best price

Best China manufacturer & factory China  in Jiddah Saudi Arabia  supplier hydraulic motor rail motor Seaton rail low speed high torque With high quality best price

Best China manufacturer & factory China  in Jiddah Saudi Arabia  supplier hydraulic motor rail motor Seaton rail low speed high torque With high quality best price

Best China manufacturer & factory China  in Jiddah Saudi Arabia  supplier hydraulic motor rail motor Seaton rail low speed high torque With high quality best price

Best China manufacturer & factory China  in Jiddah Saudi Arabia  supplier hydraulic motor rail motor Seaton rail low speed high torque With high quality best price

Best China manufacturer & factory China  in Jiddah Saudi Arabia  supplier hydraulic motor rail motor Seaton rail low speed high torque With high quality best price

Best China manufacturer & factory China  in Jiddah Saudi Arabia  supplier hydraulic motor rail motor Seaton rail low speed high torque With high quality best price